USBasp Clone

Low cost USB programmer for ATMEL AVR microcontrollers with ISP features based on Thomas Fischl USBasp and METALAB AVRProg. This clone implements the AVRProg version that has a 1MHz clock source that users can use to recover chips with wrong clock fuse settings.


Supported by the following programming softwares:
- AVRDUDE version 5.2 and up. AVRDUDE is the programming software used by
  the WinAVR development suite.
- BASCOM-AVR version 1.11.9.6 and up
- Khazama AVR Programmer
- eXtreme Burner-AVR

USBasp website : http://www.fischl.de/usbasp/
METALAB website: https://metalab.at/wiki/Avrprog-metaboard


Schematics and PCB layout will follow soon.

Power Input:
USB default (+5V)

Clock Frequency:
N/A

Programming Ports:
N/A

Board Dimension:
37mm W x 112mm L